Cotice todos los Productos y Servicios para la Industria del Agua que necesita a lo largo de todo Latinoam\E9rica.
Portable Flow Meter with Case
Flow metering and volume have efficient cleaning, homogeneous liquids with low gas and solids to the measurement of a beam.
- De-mineralized water for cooling.
- The boiler feed water in power plants.
- The pretreated wastewater in sewage plants.
- Checking other flowmeters.
- Alkaline solutions.
The portable device has advantages of the measurement from the outside, non-contact measurement, construction of the pipe cross section, no additional pressure drop, no interruption of the process, electrical conductivity, pressure, density, etc.. have no effect on the measurements, is easy to install, no maintenance requirement, is low power consumption and low operating costs.
In the portable device measuring point 2 ultrasonic sensors are attached to the outer wall with the help of a mounting device, each sensor emits and receives sonic pulses that are converted digitally in the signal converter, the output data in units Metric or U.S. units through the screen, current, frequency and status outputs.
- Portable Device (if carrying) with data logger.
- RS 232 interface.
- Degree of protection IP 65, NEMA 4/4X.
- Metro 13 For sizes up to 5000 mm / 1 / 2 "- 200".
- Flow: 0,1 - 100.000 m3 / h, or 0.5 to 400,000 GPM U.S. eqiuvalent flow rate: 0.2 - 7 m / s, or 0.66 - 23 m / s speed eqiuvalent flow: 0.2 - 7 m / s, or 0.66 - 23 m / s.
- For process temperatures up to 60 ° C / 140 ° F.
- 10,000 For liquids with Re> 10.000.
- Products: 0 / 4 to 20 mA and 1 or 100 pulses / s.
- Power supply: 90 to 257 VAC, 50 / 60 Hz Power consumption: 9 VA.
- Accuracy <± 2% of measured value, depending on the application.
|Nuestros Cientes También Han Visto|
Presencia de Aguamarket en Países como: