Portable hardness tester memory can store 100 groups

Producto n° 18512

Portable hardness tester memory can store 100 groups


Portable hardness tester mh310

The portable hardness tester is part of our product line, category subcategory Hardness Instrumentation.

The durometer is small in volume with light weight, is suitable for adoption, has outline dimensions of 212mm ? 80mm ? 32mm, is the wide range of measurement. We can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of resistance values immediately.

The hardness testers have a large LCD screen that shows all functions and parameters (with EL backlight), has 7 impact devices (available for special applications). It automatically identifies the type of impact devices, and the role of user calibration. Test at any angle, even upside down.

The durometer has a lot of memory can store 100 groups (on average 32 times ~ 1) information including single measured value, average value, impact direction, impact times, material and hardness scale etc. ., battery information that shows the remaining battery capacity and charging status.

The hardness tester can save data permanently, holds Ni-MH rechargeable battery as power supply, rechargeable battery, charging for three hours, you can use for two months. Integrated circuit load inside the instrument. Period of continuous employment of not less than 150 hours (The Off and not print). Auto power off to save power.


● Die cavity of molds.

● bearings and other parts.

● Failure analysis of pressure vessel, steam generator and other equipment.

● part of hard work.

● The equipment mounted and permanently assembled parts.

● Test area of a small hole.

● Identification of materials in the warehouse of metallic materials.

● Rapid testing in large and multi-range measurement areas of large-scale pieces of work.

● Measuring range: HLD (170 ~ 960) HLD.

● Direction of measurement: 0 ° ~ 360 °.

● Hardness Scale: HL, HB, HRB, HRC, HRA, HV, HS.

● Display: LCD segment.

● Data memory: 100 groups of max. (In terms of impact times 32 ~ 1).

● Printing paper: width (57.5 ± 0.5) mm, diameter 30 mm.

● Battery: 6V NI-MH.

● Battery charger: 9V/500mA.

● continuous period of work: around 150 hours (with backlight, no printing).

● Communication interface: USB 1.1.

● Outline dimensions: 212mm ? 80mm ? 32mm.

Cotice: Portable hardness tester memory can store 100 groups

Presencia de Aguamarket en Países como:

Chile Argentina Bolivia Colombia Costa Rica Cuba Ecuador El Salvador España Guatemala Honduras Mexico Nicaragua Panama Paraguay Perú Puerto Rico Republica Dominicana Uruguay Venezuela Francia Brasil Estados Unidos Canada Belice