UFM 800 W Ultrasonic flowmeters For DN 400 - 8000 / 16

Producto n° 5581

UFM 800 W Ultrasonic flowmeters For DN 400 - 8000 / 16


UFM 800 W Ultrasonic flowmeters

Hot Tapping for water and wastewater

Efficient flow measurement and volume counting of all types of water and wastewater in closed pipelines or in open channels and raceways.

Weld-in sensors for metal pipelines (W, also with Hot Tapping) Built-on or built-in sensors for open channels (C)


No constriction of the pipe cross-section No additional pressure drop Electrical conductivity, pressure, density, etc. have no effect on measurements Easy to install from outside or inside No maintenance Low power consumption Low operating costs

UFM 800 C Ultrasonic flowmeter with UFS 800 C sensors for measuring flow velocity in open channels. The sensors can be installed or mounted from the inside or outside of the channel.

Single-beam measurement Protection category IP 65/67/68, NEMA 4/4X/6 For DN 400 - 8000 / 16" - 320" Flowrates: 230 -3.250.000 m3/h or 500 - 14.300.000 US GPM equivalent flow velocity: 0,5 - 18 m/s or 1,5 - 54 ft/s For process temperatures up to 120°C / 248°F For pressures up to 10 bar / 150 psig Accuracy < ±5 % of measured value, depending on application

Cotice: UFM 800 W Ultrasonic flowmeters For DN 400 - 8000 / 16

Presencia de Aguamarket en Países como:

Chile Argentina Bolivia Colombia Costa Rica Cuba Ecuador El Salvador España Guatemala Honduras Mexico Nicaragua Panama Paraguay Perú Puerto Rico Republica Dominicana Uruguay Venezuela Francia Brasil Estados Unidos Canada Belice