Control Pinch Valves Series 9000
Series 9000 High Pressure Control Pinch Valve
Up to 720 psi working pressure
For on/off or control applications
Heavy-duty polyester or Kevlar® reinforced high-pressure sleeve is the only wetted part
Extended service life
Sealed body design
Materials of Construction
Ductile iron, 316 stainless steel bodies
Electric or hydraulic actuator
Drilled and tapped to mate with:
ANSI B 16.5 Class 300 flanges
ANSI B 16.1 Class 250 flanges
Optional Class 150 flanges
The Series 9000 high-pressure control pinch valve is Red Valve’s ANSI Class 300# control valve product. The heavy-duty elastomer sleeves are reinforced with high strength nylon, polyester fabrics, or Kevlarâ material. Several heavy-duty sleeve designs are available - standard full port for on/off isolation applications; double wall for severe abrasive applications; cone, reduced port, and variable orifice designs for control applications. The elastomer sleeve will close even on solids, and the flexing action of the sleeve eliminates the possibility of scaling. Combining these features with a sealed body design and no packing to maintain, results in a simple, rugged, no-hang-up, maintenance-free valve.
The Series 9000 is equipped with a heavy-duty solid steel stroke adjustment unit located on the valve base. This allows the user to fine-tune control or adjust stroke for abrasion sleeve wear. This flexibility eliminates downtime.
The Series 9000 is available with various actuators. Bevel gear actuators are available for manual operation. Hydraulic or electric actuators for automatic operation are also available. Pneumatic actuators are available on smaller or low pressure applications.
Series 9000 high-pressure control pinch valves are also available in ANSI Class 150 drilling configurations